FLEXIBLE
HEATERS
Heater Selection Chart
- Drag to View
| Insulation | Element Type | Internal Adhesive | Temp. Range | Maximum Size | Max. Resistance Density |
|---|---|---|---|---|---|
| Polyimide (Kapton) | Etched Foil | Acrylic thermoset | -200 to 150°C | 22 x 72” | 1500 Ω / in.2 |
| Etched Foil | Thermoplastic (FEP) | -200 to 200°C | 10 x 22” | 450 Ω / in.2 | |
| Etched Foil | All-Polyimide (AP) | -200 to 260°C | 22 x 22” | 1500 Ω / in.2 | |
| Silicone Rubber | Etched Foil | -50 to 235°C* | 22 x 72” | 200 Ω / in.2 | |
| Wire-Wound | -50 to 235°C* | 22 x 90” | 200 Ω / in.2 | ||
| Mica | Etched Foil | -150 to 600°C | 22 x 46” | 25 Ω / in.2 | |
| PET (Polyester) | Etched Foil | -55 to 80°C | 22 x 90” | 300 Ω / in.2 | |
| Thermal-Clear | Wire-Wound | -55 to 120°C | 11 x 22” | 1200 Ω / in.2 | |
| PTFE (Teflon) | Etched Foil | -200 to 260°C | 10 x 40” | 450 Ω / in.2 |
*UL maximum rating is 220°C
